MOVE - Interactive mixed method parsimony

CONTENTS:

• DESCRIPTION
• ADAPTING THE PROGRAM TO YOUR COMPUTER AND TO YOUR TERMINAL
• MORE ABOUT THE PARSIMONY CRITERION
• CONSTANTS
• TEST DATA SET

This program is compatible with fewer computer systems than the other programs in PHYLIP. It can be adapted to PCDOS systems or to any system whose screen or terminals emulate DEC VT52 or VT100 terminals (such as, for example, Zenith Z19, Z29, and Z49 terminals, Telnet programs for logging in to remote computers over a TCP/IP network, VT100-compatible windows in the X windowing system, and any terminal compatible with ANSI standard terminals). For any other screen types, there is a generic option which does not make use of screen graphics characters to display the character states. This will be less effective, as the states will be less easy to see when displayed.

The input data file is set up almost identically to the data files for MIX. The sole exception is that the user trees are not contained in the input file, but in the tree file, which is used both for input of the starting tree (if desired) and for output of the final tree. Note that this means that the user tree supplied on input will possibly be overwritten. The W (Weights), A (Ancestors), M (Mixed methods) and F (Factors) are possible options specified in the input file (some must also be chosen in the menu).

The user interaction starts with the program presenting a menu. The menu looks like this:

Interactive mixed parsimony algorithm, version 3.4

Settings for this run:
  X                        Use Mixed method?  No
  P                        Parsimony method?  Wagner
  A      Use ancestral states in input file?  No
  O                           Outgroup root?  No, use as outgroup species   1
  T                 Use Threshold parsimony?  No, use ordinary parsimony
  U Initial tree (arbitrary, user, specify)?  Arbitrary
  0      Graphics type (IBM PC, VT52, ANSI)?  ANSI
  L               Number of lines on screen?  24

Are these settings correct? (type Y or the letter for one to change)

After the initial menu is displayed and the choices are made, the program then sets up an initial tree and displays it. Below it will be a one-line menu of possible commands, which looks like this:

NEXT? (Options: R # + - S . T U W O F C H ? X Q) (H or ? for Help)

R

("Rearrange"). This command asks for the number of a node which is to be removed from the tree. It and everything to the right of it on the tree is to be removed (by breaking the branch immediately below it). The command also asks for the number of a node below which that group is to be inserted. If an impossible number is given, the program refuses to carry out the rearrangement and asks for a new command. The rearranged tree is displayed: it will often have a different number of steps than the original. If you wish to undo a rearrangement, use the Undo command, for which see below.

#

This command, and the +, - and S commands described below, determine which character has its states displayed on the branches of the trees. The initial tree displayed by the program does not show states of sites. When # is typed, the program does not ask the user which character is to be shown but automatically shows the states of the next binary character that is not compatible with the tree (the next character that does not perfectly fit the current tree). The search for this character "wraps around" so that if it reaches the last character without finding one that is not compatible with the tree, the search continues at the first character; if no incompatible character is found the current character is shown, and if no current character is shown then the first character is shown. The display takes the form of different symbols or textures on the branches of the tree. The state of each branch is actually the state of the node above it. A key of the symbols or shadings used for states 0, 1 and ? are shown next to the tree. State ? means that either state 0 or state 1 could exist at that point on the tree, and that the user may want to consider the different possibilities, which are usually apparent by inspection.

+

This command is the same as # except that it goes forward one character, showing the states of the next character. If no character has been shown, using + will cause the first character to be shown. Once the last character has been reached, using + again will show the first character.

-

This command is the same as + except that it goes backwards, showing the states of the previous character. If no character has been shown, using - will cause the last character to be shown. Once character number 1 has been reached, using - again will show the last character.

S

("Show"). This command is the same as + and - except that it causes the program to ask you for the number of a character. That character is the one whose states will be displayed. If you give the character number as 0, the program will go back to not showing the states of the characters.

.

This command simply causes the current tree to be redisplayed. It is of use when the tree has partly disappeared off of the top of the screen owing to too many responses to commands being printed out at the bottom of the screen.

T

("Try rearrangements"). This command asks for the name of a node. The part of the tree at and above that node is removed from the tree. The program tries to re-insert it in each possible location on the tree (this may take some time, and the program reminds you to wait). Then it prints out a summary. For each possible location the program prints out the number of the node to the right of the place of insertion and the number of steps required in each case. These are divided into those that are better, tied, or worse than the current tree. Once this summary is printed out, the group that was removed is inserted into its original position. It is up to you to use the R command to actually carry out any the arrangements that have been tried.

U

("Undo"). This command reverses the effect of the most recent rearrangement, outgroup re-rooting, or flipping of branches. It returns to the previous tree topology. It will be of great use when rearranging the tree and when a rearrangement proves worse than the preceding one -- it permits you to abandon the new one and return to the previous one without remembering its topology in detail.

W

("Write"). This command writes out the current tree onto a tree output file. If the file already has been written to by this run of MOVE, it will ask you whether you want to replace the contents of the file, add the tree to the end of the file, or not write out the tree to the file. The tree is written in the standard format used by PHYLIP (a subset of the New Hampshire standard). It is in the proper format to serve as the User- Defined Tree for setting up the initial tree in a subsequent run of the program. Note that if you provided the initial tree topology in a tree file and replace its contents, that initial tree will be lost.

O

("Outgroup"). This asks for the number of a node which is to be the outgroup. The tree will be redisplayed with that node as the left descendant of the bottom fork. Under some options (for example the Camin- Sokal parsimony method or the Ancestor state options), the number of steps required on the tree may change on re-rooting. Note that it is possible to use this to make a multi-species group the outgroup (i.e., you can give the number of an interior node of the tree as the outgroup, and the program will re-root the tree properly with that on the left of the bottom fork).

F

("Flip"). This asks for a node number and then flips the two branches at that node, so that the left-right order of branches at that node is changed. This does not actually change the tree topology (or the number of steps on that tree) but it does change the appearance of the tree.

C

("Clade"). When the data consist of more than 12 species (or more than half the number of lines on the screen if this is not 24), it may be difficult to display the tree on one screen. In that case the tree will be squeezed down to one line per species. This is too small to see all the interior states of the tree. The C command instructs the program to print out only that part of the tree (the "clade") from a certain node on up. The program will prompt you for the number of this node. Remember that thereafter you are not looking at the whole tree. To go back to looking at the whole tree give the C command again and enter "0" for the node number when asked. Most users will not want to use this option unless forced to.

H

("Help"). Prints a one-screen summary of what the commands do, a few words for each command.

?

("?"). A synonym for H. Same as Help command.

X

("Exit"). Exit from program. If the current tree has yet not been saved into a file, the program will ask you whether it should be saved.

Q

("Quit") A synonym for X. Same as the eXit command.

ADAPTING THE PROGRAM TO YOUR COMPUTER AND TO YOUR TERMINAL

As we have seen, the initial menu of the program allows you to choose among four screen types (PCDOS, Ansi, VT52 and none). If you want to avoid having to make this choice every time, you can change some of the constants at the beginning of the program to have it initialize itself in the proper way, and recompile it. Among the constants at the beginning of the program you will find three that determine which kind of screen graphics the program will use. These constants are "ibmpc0", "vt520", and "ansi0". In the distribution version of the programs, "ansi0" is set to true and the others to false, so that the version will work with ANSI compatible terminals.

On the other hand if you have a terminal compatible with DEC's VT52, but not with the ANSI terminal, you should change the constant "ansi0" to false and "vt520" to true. If you have instead a terminal which is compatible with IBM PC graphics, you should set the constant "ibmpc0" to true and the others to false. If your terminal is compatible with none of these, you will have to set the constants all false, in which case special graphics characters will not be used to indicate character states, but only "*" for 1, "=" for 0, and "." for ? states. This is less easy to look at.

The program should work successfully on DEC VAX systems under either the VMS or the Unix operating systems without any other changes.

MORE ABOUT THE PARSIMONY CRITERION

MOVE uses as its numerical criterion the Wagner and Camin-Sokal parsimony methods in mixture, where each character can have its method specified separately. The program defaults to carrying out Wagner parsimony.

The Camin-Sokal parsimony method explains the data by assuming that changes 0 --> 1 are allowed but not changes 1 --> 0. Wagner parsimony allows both kinds of changes. (This under the assumption that 0 is the ancestral state, though the program allows reassignment of the ancestral state, in which case we must reverse the state numbers 0 and 1 throughout this discussion). The criterion is to find the tree which requires the minimum number of changes. The Camin- Sokal method is due to Camin and Sokal (1965) and the Wagner method to Eck and Dayhoff (1966) and to Kluge and Farris (1969).

Here are the assumptions of these two methods:

1. Ancestral states are known (Camin-Sokal) or unknown (Wagner).
2. Different characters evolve independently.
3. Different lineages evolve independently.
4. Changes 0 --> 1 are much more probable than changes 1 --> 0 (Camin- Sokal) or equally probable (Wagner).
5. Both of these kinds of changes are a priori improbable over the evolutionary time spans involved in the differentiation of the group in question.
6. Other kinds of evolutionary event such as retention of polymorphism are far less probable than 0 --> 1 changes.
7. Rates of evolution in different lineages are sufficiently low that two changes in a long segment of the tree are far less probable than one change in a short segment.

CONSTANTS

At the beginning of the program are a series of constants, which can be changed to help adapt the program to different computer systems. "nmlngth" is the length of the species names. "screenlines" specifies the number of lines per screen, which you will normally want to leave at its default value of 24. I have already described the constants "ibmpc0", "vt520", and "ansi0" for specifying the terminal type.

Below is a test data set, but we cannot show the output it generates because of the interactive nature of the program.

TEST DATA SET

     5    6
Alpha     110110
Beta      110000
Gamma     100110
Delta     001001
Epsilon   001110